For use over Bob Smith's standard #312 top. These be used with all thicknesses of Cyanoacrylate glue from Bob Smith with the except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application. Item comes packaged in a pack of 6.
For use over the standard Bob Smith Industries #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone. Sold in a pack of 6.
For use with Bob Smith Industries Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas. Sold in a pack of 6. Bob Smith #314 cap not included.
For use over the standard #312 top from Bob Smith Industries, it allows thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.
Two foot length of PTFE tubing which be cut off to any length (usually 2") and used with either Pocket CA caps or the Bob Smith #312 top. This product is designed to be used with thin CA such as a Insta-Cure or Super Gold. By cutting one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA.
This product is commonly used for applying adhesive into hard to reach areas and is commonly used in the dental lab industry.
Sold in a pack of 2.