Cyanoacrylate Glues & Adhesives

Cyanoacrylate Glues & Adhesives

Cyanoacrylate Glues & Adhesives

Filter Products Showing 1 - 18 of 20 results
Sort By
Price Range
Categories
Viscosity
Foam Safe
Odorless
Paint Finish
Filter selected
  • Bob Smith Finish Cure 20 Minute EpoxyQuick view

    Bob Smith Finish-Cure 20 Minute Epoxy

    $11.99$27.99
    Bob Smith's Finish-Cure 20 minute epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. Finish Cure can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, Finish-Cure should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on Finish-Cure. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. Finish-Cure is best mixed in a disposable cup. Bob Smith's Finish-Cure 20 Minute Epoxy is has the least discoloration over time.
    Select options
    Compare
  • Bob Smith IC-2000 Rubber Toughened CA Super GlueQuick view

    Bob Smith IC-2000 Tire Glue Rubber Toughened CA Glue

    $8.40$9.99
    IC-2000 is a rubber-toughened cyanoacrylate glue that forms superior shock resistant bonds on non-porous surfaces.  The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. IC-2000 is well renowned in the R/C car & truck circuit as being the best adhesive for R/C car tires. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET Accelerator. For model use, IC-2000 is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. When cured, IC-2000 is pliable enough to be carved with a hobby knife. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith IC-Gel CA PasteQuick view

    Bob Smith IC-Gel CA Paste

    $7.25
    Bob Smith Industries IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Bob Smith Industries Maxi-Cure. IC-GEL, although it can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want. It popular with those who either assemble fishing tanks or need to patch a crack in one. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Insta-Cure Super Thin Gap Filling CA GlueQuick view

    Bob Smith Insta-Cure Super Thin Filling CA Glue

    $5.95$20.49
    Insta-Cure cyanoacrylate glue by Bob Smith Industries features a water-thin viscosity that easily seeps deep into joints by capillary action and cures in only a matter of a few seconds. When bonding objects with Bob Smith Industries' Insta-Cure, the surfaces must be tight fitting and should be held together while you apply the cyanoacrylate glue around the edges of the seam. In addition, this glue is also capable of penetrating more than the surface area of the wood creating a stronger bond. Insta-Cure is perfect when gluing balsa wood and ceramics, but also works well for soft woods, fiberglass and hard plastics and is water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Insta-Cure Super Thin Pocket CA Super GlueQuick view

    Bob Smith Insta-Cure Super Thin Gap Filling Pocket CA Glue

    $7.99$15.49
    Insta-Cure Pocket CA cyanoacrylate glue by Bob Smith Industries features a water-thin viscosity that easily seeps deep into joints by capillary action and cures in only a matter of a few seconds. When bonding objects with Bob Smith Industries' Insta-Cure, the surfaces must be tight fitting and should be held together while you apply the cyanoacrylate glue around the edges of the seam. In addition, this glue is also capable of penetrating more than the surface area of the wood creating a stronger bond. Insta-Cure is perfect when gluing balsa wood and ceramics, but also works well for soft woods, fiberglass and hard plastics and is water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Insta-Cure+ Bob Smith IndustriesQuick view

    Bob Smith Insta-Cure+ Medium Thick CA Super Glue

    $5.95$20.49
    Insta-Cure+ super glue cyanoacrylate features a medium thick viscosity compared to its Insta-Cure CA (thin) and Maxi-Cure (thick) counterparts and is designed for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Insta-Cure+ Medium Thick Pocket CA Super GlueQuick view

    Bob Smith Insta-Cure+ Medium Thick Pocket CA Super Glue

    $7.99$15.49
    Insta-Cure+ Pocket CA super glue cyanoacrylate features a medium thick viscosity compared to its Insta-Cure CA (thin) and Maxi-Cure (thick) counterparts and is designed for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Insta-Flex Flexible CA Super GlueQuick view

    Bob Smith Insta-Flex Flexible CA Super Glue

    $9.49
    Bob Smith's Insta-Flex flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, Insta-Flex will not turn brittle and remains clear, even when accelerated with Insta-Set Accelerator. In addition, it has superior shock resistance and although not as thin in consistency as Insta-Cure, Insta-Flex still has good penetrating qualities and its application can be easier to control. For CA hinges, Bob Smith Industries recommends drilling a 1/16" hole in the center of the hinge slots to insure the complete saturation of the hinge when Inta-Flex is applied. Insta-Flex has also proven to be superior when bonding anodized aluminum. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Insta-Flex+ Flexible CA Super GlueQuick view

    Bob Smith Insta-Flex+ Flexible CA Super Glue

    $9.49
    Bob Smith Industries' Insta-Flex+ clear rubber toughened has similar qualities to its black IC-2000 Tire Glue CA but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since Insta-Fle+ has this carbon removed, its strength is a little less than that of IC-2000, but still superior to standard CA's. When aesthetics are important and a flexible bond is required, Insta-Flex+ is your best choice from Bob Smith Industries. It forms superior bonds to soft urethane and vinyl plastics. Both Insta-Flex and Insta-Flex+ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistant bonds. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Insta-Set Accelerator for CA GluesQuick view

    Bob Smith Insta-Set Accelerator for CA Glues

    Rated 3.00 out of 5
    $6.49$12.99
    Bob Smith Industries Insta-Set Accelerator for Cyanoacrylate glues is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Bob Smith's Insta Set Accelerator significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set Accelerator can be applied to one surface and Cyanoacrylates to the opposite surface. When brought together, they will bond instantly. Insta-Set is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam with the exception of granite rock counter tops. BSI-155 (6.75 oz. Aerosol Can) is a Limited / ORM-D product and can only be shipped by ground. This can equate to longer than normal delivery times.  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
  • Bob Smith Maxi-Cure / Insta-Set Accelerator Combo PackQuick view

    Bob Smith Maxi-Cure Extra Thick CA / Insta-Set Accelerator Combo Pack Kit

    $9.95
    Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those who are carpenters who specialize in a wide variety of wood working projects from picture frames to wood ceiling moldings. Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. Maxi-Cure bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. Insta-Set Accelerator is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set Accelerator in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Maxi-Cure Extra Thick CA Super GlueQuick view

    Bob Smith Maxi-Cure Extra Thick CA Super Glue

    $5.95$20.49
    MAXI-CURE super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Quick view

    Bob Smith Maxi-Cure Extra Thick Pocket CA Super Glue

    $7.99$15.49
    MAXI-CURE Pocket CA super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Quick-Cure 5 Minute EpoxyQuick view

    Bob Smith Quik-Cure 5 Minute Epoxy

    $8.99$13.39
    Bob Smith's Quik-Cure 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quick-Cure shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure is Bob Smith Industries only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure can be handled after 15 minutes. Full strength is reached in about 1 hour. Bob Smith's Quik-Cure 5 Minute Epoxy is known to discolor and turn yellow as it ages. Keep this in mind when using it for certain applications. This product is formerly known as Bob Smith's Quick-Cure 5 Minute Epoxy.
    Select options
    Compare
  • Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super GlueQuick view

    Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super Glue

    $6.95
    Bob Smith's ROYAL-ONYX is a revolutionary new adhesive designed for the golf industry. This one-part cyanoacrylate is the strongest and most impact resistant adhesive available for bonding club heads. Clubs are typically playable within 45 minutes after application and it's the fastest and most durable way to get your clubs on the course. One 1.5 oz bottle assembles between 50 to 75 club heads. Shake well before use.
    Select options
    Compare
  • Bob Smith Super Gold Super Thin Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold Super Thin Odorless Foam Safe CA Glue

    $7.99$19.99
    Bob Smith Industries' Super-Gold is an odorless low viscosity CA just like Insta-Cure. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, it will not Super Gold cyanoacrylate will not fog clear plastic. If you're looking for something with a higher viscosity and not water thin, check out the Super Gold+ which has a similar viscosity to Insta-Cure+. Super-Gold’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Super Gold+ Medium Thick Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold+ Medium Thick Odorless Gap Filling Foam Safe CA Glue

    $7.99$19.99
    Bob Smith Industries' Super-Gold+ is an odorless Insta-Cure CAs. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, Super Gold+ cyanoacrylate will not fog clear plastic and is great for attaching clear plastic canopies. Super-Gold+’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold+ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. If you're looking for a foam safe and odorless CA glue that's a bit thinner, check out Bob Smith's Super Gold CA Glue. It features a thin viscosity and great for filling tight gaps, just like Insta-Cure Super Thin. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Super Gold Pocket CA Super Thin Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold+ Pocket CA Gap Filling Odorless Foam Safe CA Glue

    $12.49
    Bob Smith Industries' Super-Gold+ Pocket CA is an odorless low viscosity CA just like Insta-Cure+. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, it will not fog clear plastic. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare