Description
Fine Tip Non-clog 6" long pipette for the application for thin CA glues for all sorts of hobby projects.
Bob Smith CA Fine Tip Non-Clog Applicators #322 6″ (Pack of 5)
$4.99
Fine Tip Non-clog 6″ long pipette for the application for thin CA glues. Can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.
Sold in a pack of 5
In stock
You may also like…
-
Quick viewBob Smith CA Regular Tip Non-Clog-Applicators #321 6″ (Pack of 5)
$4.99Regular Tip Non-clog 6" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper. Sold in a pack of 5Add to cart -
Quick viewBob Smith CA Extenter Tips #301 (Pack of 6)
$4.49For use over Bob Smith's standard #312 top. These be used with all thicknesses of Cyanoacrylate glue from Bob Smith with the except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application. Item comes packaged in a pack of 6.Add to cart -
Quick viewBob Smith PTFE Tubing #305 (Pack of 2)
$4.49Two foot length of PTFE tubing which be cut off to any length (usually 2") and used with either Pocket CA caps or the Bob Smith #312 top. This product is designed to be used with thin CA such as a Insta-Cure or Super Gold. By cutting one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA. This product is commonly used for applying adhesive into hard to reach areas and is commonly used in the dental lab industry. Sold in a pack of 2.Add to cart
Related products
-
Quick viewBob Smith CA Extra Long Extender Tips #303 (Pack of 6)
$3.99For use over the standard Bob Smith Industries #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone. Sold in a pack of 6.Add to cart -
Quick viewBob Smith Finish-Cure 20 Minute Epoxy
$14.49 – $33.99Bob Smith's Finish-Cure 20 minute epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. Finish Cure can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, Finish-Cure should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on Finish-Cure. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. Finish-Cure is best mixed in a disposable cup. Bob Smith's Finish-Cure 20 Minute Epoxy is has the least discoloration over time.Select options -
Quick viewBob Smith Super Gold+ Medium Thick Odorless Gap Filling Foam Safe CA Glue
$8.99 – $23.99Bob Smith Industries' Super-Gold+ is an odorless Insta-Cure CAs. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, Super Gold+ cyanoacrylate will not fog clear plastic and is great for attaching clear plastic canopies. Super-Gold+’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold+ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. If you're looking for a foam safe and odorless CA glue that's a bit thinner, check out Bob Smith's Super Gold CA Glue. It features a thin viscosity and great for filling tight gaps, just like Insta-Cure Super Thin. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!Select options -
Quick viewBob Smith Extra Fine CA Extender Tips #302 (Pack of 6)
$4.49For use over the standard #312 top from Bob Smith Industries, it allows thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.Add to cart
Reviews
There are no reviews yet.