Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!">

Cart0

Insta-Cure+ Bob Smith Industries
Bob Smith Insta-Cure+ Medium Thick CA Super Glue

Bob Smith Insta-Cure+ Medium Thick CA Super Glue

$5.95 – $20.49

Insta-Cure+ super glue cyanoacrylate features a medium thick viscosity compared to its Insta-Cure CA (thin) and Maxi-Cure (thick) counterparts and is designed for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used.

Guaranteed Fresh! Our products don’t sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!

Clear
Add to Wishlist
Compare
SKU: BSI106A Category: Tags: , , , , , , , , ,

Description

Insta-Cure+ is perfect when gluing balsa wood and soft wood, but also works well for hard woods, glass, metal, fiberglass, ceramics, hard plastics and rubber. In addition it's also water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs.

Bob Smith's Insta-Cure+ CA Super Glue comes in four sizes for whatever your project size is (1/2 oz BSI106 / 1 oz BSI107 / 2 oz BSI108 / 8 oz BSI109)

When using Bob Smith Industries' Insta-Cure+, it's important to note that this cyanoacrylate glue gives of a vapor that may irritate the eyes and nose. If this may affect you, Bob Smith Industries has created an alternative product with its line of Super Gold+ CAs, which are also foam safe. If you are looking for something that's a little bit thicker for your application, Bob Smith's Insta-Cure+ is the next CA up for thickness, followed by its MAXI-CURE.

Refer to the chart below for product uses.

BSI_CHART

Additional information

Viscosity

Medium Thick
Foam Safe

No
Size

1 oz., 1/2 oz., 2 oz., 8 oz.
Additional

Eye and/or Nose Irritation, Not Foam Safe, Water Resistant
Odorless

No
Product Type

Cyanoacrylate
Brand

Bob Smith Industries

Reviews

There are no reviews yet.

Be the first to review “Bob Smith Insta-Cure+ Medium Thick CA Super Glue”

Your email address will not be published. Required fields are marked *

You may also like…

  • Bob Smith Maxi-Cure Extra Thick CA Super GlueQuick view

    Bob Smith Maxi-Cure Extra Thick CA Super Glue

    $5.95 – $20.49
    MAXI-CURE super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Maxi-Cure / Insta-Set Accelerator Combo PackQuick view

    Bob Smith Maxi-Cure Extra Thick CA / Insta-Set Accelerator Combo Pack Kit

    $10.49
    Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those who are carpenters who specialize in a wide variety of wood working projects from picture frames to wood ceiling moldings. Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. Maxi-Cure bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. Insta-Set Accelerator is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set Accelerator in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
    Add to Wishlist
  • Bob Smith Insta-Cure Super Thin Gap Filling CA GlueQuick view

    Bob Smith Insta-Cure Super Thin Filling CA Glue

    $5.95 – $20.49
    Insta-Cure cyanoacrylate glue by Bob Smith Industries features a water-thin viscosity that easily seeps deep into joints by capillary action and cures in only a matter of a few seconds. When bonding objects with Bob Smith Industries' Insta-Cure, the surfaces must be tight fitting and should be held together while you apply the cyanoacrylate glue around the edges of the seam. In addition, this glue is also capable of penetrating more than the surface area of the wood creating a stronger bond. Insta-Cure is perfect when gluing balsa wood and ceramics, but also works well for soft woods, fiberglass and hard plastics and is water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Insta-Set Accelerator for CA GluesQuick view

    Bob Smith Insta-Set Accelerator for CA Glues

    Rated 3.00 out of 5
    $6.99 – $13.49
    Bob Smith Industries Insta-Set Accelerator for Cyanoacrylate glues is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Bob Smith's Insta Set Accelerator significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set Accelerator can be applied to one surface and Cyanoacrylates to the opposite surface. When brought together, they will bond instantly. Insta-Set is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam with the exception of granite rock counter tops. BSI-155 (6.75 oz. Aerosol Can) is a Limited / ORM-D product and can only be shipped by ground. This can equate to longer than normal delivery times.  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
    Add to Wishlist

Related products

Please Note: Paint Related Items Require a Minimum Order of 5 Items or more to Checkout or you will get an Error on the Checkout page! Dismiss