Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!">

Cart0

Bob Smith Insta-Cure Super Thin Pocket CA Super Glue
Bob Smith Insta-Cure Super Thin Pocket CA Glue

Bob Smith Insta-Cure Super Thin Pocket CA Glue

$8.49 – $15.49

Insta-Cure Pocket CA cyanoacrylate glue by Bob Smith Industries features a water-thin viscosity that easily seeps deep into joints by capillary action and cures in only a matter of a few seconds. When bonding objects with Bob Smith Industries’ Insta-Cure, the surfaces must be tight fitting and should be held together while you apply the cyanoacrylate glue around the edges of the seam. In addition, this glue is also capable of penetrating more than the surface area of the wood creating a stronger bond. Insta-Cure is perfect when gluing balsa wood and ceramics, but also works well for soft woods, fiberglass and hard plastics and is water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs.

Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!) 

Guaranteed Fresh! Our products don’t sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!

Clear
Add to Wishlist
Compare
SKU: BSI131A-1 Category: Tags: , , , , , , , , ,

Description

Bob Smith's Insta-Cure Pocket CA Glue comes in four sizes for whatever your project size is (3/4 oz BSI131 / 4 oz BSI134)

When using Bob Smith Industries' Insta-Cure, it's important to note that this cyanoacrylate glue gives of a vapor that may irritate the eyes and nose. If this may affect you, Bob Smith Industries has created an alternative product with its line of Super Gold CAs, which are also foam safe. If you are looking for something that's a little bit thicker for your application, Bob Smith's Insta-Cure+ is the next CA up for thickness, followed by its MAXI-CURE.

Refer to the chart below for product uses.

BSI_CHART

Additional information

Viscosity

Super Thin
Foam Safe

No
Size

3/4 oz., 4 oz.
Additional

Eye and/or Nose Irritation, Not Foam Safe, Water Resistant
Odorless

No
Product Type

Cyanoacrylate
Brand

Bob Smith Industries

Reviews

There are no reviews yet.

Be the first to review “Bob Smith Insta-Cure Super Thin Pocket CA Glue”

Your email address will not be published. Required fields are marked *

You may also like…

  • Bob Smith Maxi-Cure / Insta-Set Accelerator Combo PackQuick view

    Bob Smith Maxi-Cure Extra Thick CA / Insta-Set Accelerator Combo Pack Kit 157H

    $10.49
    Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those who are carpenters who specialize in a wide variety of wood working projects from picture frames to wood ceiling moldings. Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. Maxi-Cure bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. Insta-Set Accelerator is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set Accelerator in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
    Add to Wishlist
  • Insta-Cure+ Bob Smith IndustriesQuick view

    Bob Smith Insta-Cure+ Medium Thick CA Super Glue

    $5.95 – $20.49
    Insta-Cure+ super glue cyanoacrylate features a medium thick viscosity compared to its Insta-Cure CA (thin) and Maxi-Cure (thick) counterparts and is designed for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Maxi-Cure Extra Thick CA Super GlueQuick view

    Bob Smith Maxi-Cure Extra Thick CA Super Glue

    $5.95 – $20.49
    MAXI-CURE super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Insta-Set Accelerator for CA GluesQuick view

    Bob Smith Insta-Set Accelerator (151/152/155) for CA Glues

    $6.99 – $13.49
    Bob Smith Industries Insta-Set Accelerator for Cyanoacrylate glues is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Bob Smith's Insta Set Accelerator significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set Accelerator can be applied to one surface and Cyanoacrylates to the opposite surface. When brought together, they will bond instantly. Insta-Set is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam with the exception of granite rock counter tops.   BSI-155 (6.75 oz. Aerosol Can) is a Limited / ORM-D product and can only be shipped by ground. This can equate to longer than normal delivery times.  Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
    Add to Wishlist

Related products

  • Bob Smith Quick-Cure 5 Minute EpoxyQuick view

    Bob Smith Quik-Cure 5 Minute Epoxy

    $10.99 – $16.49
    Bob Smith's Quik-Cure 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quick-Cure shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure is Bob Smith Industries only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure can be handled after 15 minutes. Full strength is reached in about 1 hour. Bob Smith's Quik-Cure 5 Minute Epoxy is known to discolor and turn yellow as it ages. Keep this in mind when using it for certain applications. This product is formerly known as Bob Smith's Quick-Cure 5 Minute Epoxy. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!) 
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Mid-Cure 15 Minute EpoxyQuick view

    Bob Smith Mid-Cure 15 Minute Epoxy

    $10.99 – $16.49
    Bob Smith Industries MID-CURE 15 minute epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUICK-CURE in most applications. MID-CURE is Bob Smith's most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength. Bob Smith's Mid-Cure 5 Minute Epoxy is known to discolor and turn yellow as it ages. Keep this in mind when using it for certain applications. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!) 
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super GlueQuick view

    Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super Glue

    $6.95
    Bob Smith's ROYAL-ONYX is a revolutionary new adhesive designed for the golf industry. This one-part cyanoacrylate is the strongest and most impact resistant adhesive available for bonding club heads. Clubs are typically playable within 45 minutes after application and it's the fastest and most durable way to get your clubs on the course. One 1.5 oz bottle assembles between 50 to 75 club heads. Shake well before use. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!) 
    Select options
    Compare
    Add to Wishlist
  • Bob Smith IC-Gel CA PasteQuick view

    Bob Smith IC-Gel CA Paste

    $7.49
    Bob Smith Industries IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Bob Smith Industries Maxi-Cure. IC-GEL, although it can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want. It popular with those who either assemble fishing tanks or need to patch a crack in one. Free Same Day Shipping* | USPS First Class (2-3 Day Delivery on Average!)  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
    Add to Wishlist