Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!">

Cart0

Bob Smith Maxi-Cure Extra Thick Pocket CA Super Glue

Bob Smith Maxi-Cure Extra Thick Pocket CA Super Glue

$8.49 – $15.95

MAXI-CURE Pocket CA super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive.

Guaranteed Fresh! Our products don’t sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!

Clear
Add to Wishlist
Compare
SKU: BSI135A Category: Tags: , , , , , , , , ,

Description

MAXI-CURE works great when gluing soft wood and hard wood, glass and metal, fiberglass, ceramics, hard plastics, rubber, lamination and reinforcing and works well on balsa wood. In addition it's also water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs.

In addition, MAXI-CURE has proven to be very popular in the archery and crossbow business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE is usually one of the least expensive routes to go.

Bob Smith's MAXI-CURE CA Super Glue comes in four sizes for whatever your project size is (1/2 oz BSI111 / 1 oz BSI112 / 2 oz BSI113 / 8 oz BSI114)

When using Bob Smith Industries MAXI-CURE, it's important to note that this cyanoacrylate glue gives of a vapor that may irritate the eyes and nose. If this may affect you, Bob Smith Industries has created an alternative product with its line of Super Gold+ CAs, which are also foam safe. If you are looking for something that's a little bit less thick for your application, Bob Smith's Insta-Cure+ is the the next step down in viscosity.

Refer to the chart below for product uses.

BSI_CHART

Additional information

Viscosity

Extra Thick
Foam Safe

No
Size

3/4 oz., 4 oz.
Additional

Eye and/or Nose Irritation, Not Foam Safe, Water Resistant
Odorless

No
Product Type

Cyanoacrylate
Brand

Bob Smith Industries

Reviews

There are no reviews yet.

Be the first to review “Bob Smith Maxi-Cure Extra Thick Pocket CA Super Glue”

Your email address will not be published. Required fields are marked *

You may also like…

  • Bob Smith Maxi-Cure / Insta-Set Accelerator Combo PackQuick view

    Bob Smith Maxi-Cure Extra Thick CA / Insta-Set Accelerator Combo Pack Kit 157H

    $11.99
    Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those who are carpenters who specialize in a wide variety of wood working projects from picture frames to wood ceiling moldings. Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. Maxi-Cure bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. Insta-Set Accelerator is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set Accelerator in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
    Add to Wishlist
  • Bob Smith Insta-Set Accelerator for CA GluesQuick view

    Bob Smith Insta-Set Accelerator (151/152/155) for CA Glues

    $6.99 – $13.49
    Bob Smith Industries Insta-Set Accelerator for Cyanoacrylate glues is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Bob Smith's Insta Set Accelerator significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set Accelerator can be applied to one surface and Cyanoacrylates to the opposite surface. When brought together, they will bond instantly. Insta-Set is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam with the exception of granite rock counter tops.   BSI-155 (6.75 oz. Aerosol Can) is a Limited / ORM-D product and can only be shipped by ground. This can equate to longer than normal delivery times.  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
    Add to Wishlist
  • Insta-Cure+ Bob Smith IndustriesQuick view

    Bob Smith Insta-Cure+ Medium Thick CA Super Glue

    $5.95 – $20.49
    Insta-Cure+ super glue cyanoacrylate features a medium thick viscosity compared to its Insta-Cure CA (thin) and Maxi-Cure (thick) counterparts and is designed for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist
  • Bob Smith Insta-Cure Super Thin Gap Filling CA GlueQuick view

    Bob Smith Insta-Cure Super Thin Filling CA Glue

    $5.95 – $20.49
    Insta-Cure cyanoacrylate glue by Bob Smith Industries features a water-thin viscosity that easily seeps deep into joints by capillary action and cures in only a matter of a few seconds. When bonding objects with Bob Smith Industries' Insta-Cure, the surfaces must be tight fitting and should be held together while you apply the cyanoacrylate glue around the edges of the seam. In addition, this glue is also capable of penetrating more than the surface area of the wood creating a stronger bond. Insta-Cure is perfect when gluing balsa wood and ceramics, but also works well for soft woods, fiberglass and hard plastics and is water resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and dental labs. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
    Add to Wishlist

Related products

  • Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super GlueQuick view

    Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super Glue

    $6.95
    Bob Smith's ROYAL-ONYX is a revolutionary new adhesive designed for the golf industry. This one-part cyanoacrylate is the strongest and most impact resistant adhesive available for bonding club heads. Clubs are typically playable within 45 minutes after application and it's the fastest and most durable way to get your clubs on the course. One 1.5 oz bottle assembles between 50 to 75 club heads. Shake well before use.
    Select options
    Compare
    Add to Wishlist
  • Bob Smith PTFE Tubing #305 (Pack of 2)Quick view

    Bob Smith PTFE Tubing #305 (Pack of 2)

    $2.99
    Two foot length of PTFE tubing which be cut off to any length (usually 2") and used with either Pocket CA caps or the Bob Smith #312 top. This product is designed to be used with thin CA such as a Insta-Cure or Super Gold. By cutting one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA. This product is commonly used for applying adhesive into hard to reach areas and is commonly used in the dental lab industry. Sold in a pack of 2.
    Add to cart
    Compare
    Add to Wishlist
  • Bob Smith Foam-Cure Flexible Silicon Foam GlueQuick view

    Bob Smith Foam-Cure Flexible Silicone Foam Glue (Foam Safe)

    $6.49 – $8.49
    Bob Smith's FOAM-CURE is a flexible silicone based adhesive that works very well on EPP and EPO types of foams. It is crystal clear and cures to a more flexible consistency than Cyanoacrylate. It is, however, not instant bonding like Cyanoacrylate and takes roughly 15 to 30 minutes to setup. FOAM-CURE works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE requires exposure to air for drying. This product is an ORM-D regulated item and must be shipped by ground. This can equate to longer than anticipated delivery times compared to standard Priority & First Class mail packages.   
    Select options
    Compare
    Add to Wishlist
  • Bob Smith IC-Gel CA PasteQuick view

    Bob Smith IC-Gel CA Paste

    $6.99
    Bob Smith Industries IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Bob Smith Industries Maxi-Cure. IC-GEL, although it can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want. It popular with those who either assemble fishing tanks or need to patch a crack in one. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
    Add to Wishlist