Shop

Shop

Filter Products Showing 19 - 36 of 484 results
Sort By
Price
Categories
Viscosity
Foam Safe
Odorless
Paint Finish
Filter selected
  • Bob Smith Insta-Set Accelerator for CA GluesQuick view

    Bob Smith Insta-Set Accelerator for CA Glues

    Rated 3.00 out of 5
    $6.49$12.99
    Bob Smith Industries Insta-Set Accelerator for Cyanoacrylate glues is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Bob Smith's Insta Set Accelerator significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set Accelerator can be applied to one surface and Cyanoacrylates to the opposite surface. When brought together, they will bond instantly. Insta-Set is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam with the exception of granite rock counter tops. BSI-155 (6.75 oz. Aerosol Can) is a Limited / ORM-D product and can only be shipped by ground. This can equate to longer than normal delivery times.  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
  • Bob Smith Maxi-Cure / Insta-Set Accelerator Combo PackQuick view

    Bob Smith Maxi-Cure Extra Thick CA / Insta-Set Accelerator Combo Pack Kit

    $9.95
    Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those who are carpenters who specialize in a wide variety of wood working projects from picture frames to wood ceiling moldings. Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. Maxi-Cure bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. Insta-Set Accelerator is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set Accelerator in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Maxi-Cure Extra Thick CA Super GlueQuick view

    Bob Smith Maxi-Cure Extra Thick CA Super Glue

    $5.95$20.49
    MAXI-CURE super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Quick view

    Bob Smith Maxi-Cure Extra Thick Pocket CA Super Glue

    $7.99$15.49
    MAXI-CURE Pocket CA super glue extra thick cyanoacrylate features a thick viscosity and is the best CA for most plastics, including GE’s Lexan and when it comes to plastic modeling assembly, MAXI-CURE is the best choice. When used with INSTA-SET Accelerator, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Mid-Cure 15 Minute EpoxyQuick view

    Bob Smith Mid-Cure 15 Minute Epoxy

    $9.99$14.99
    Bob Smith Industries MID-CURE 15 minute epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUICK-CURE in most applications. MID-CURE is Bob Smith's most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength. Bob Smith's Mid-Cure 5 Minute Epoxy is known to discolor and turn yellow as it ages. Keep this in mind when using it for certain applications.
    Select options
    Compare
  • Bob Smith PTFE Tubing #305 (Pack of 2)Quick view

    Bob Smith PTFE Tubing #305 (Pack of 2)

    $4.49
    Two foot length of PTFE tubing which be cut off to any length (usually 2") and used with either Pocket CA caps or the Bob Smith #312 top. This product is designed to be used with thin CA such as a Insta-Cure or Super Gold. By cutting one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA. This product is commonly used for applying adhesive into hard to reach areas and is commonly used in the dental lab industry. Sold in a pack of 2.
    Add to cart
    Compare
  • Bob Smith Quick-Cure 5 Minute EpoxyQuick view

    Bob Smith Quik-Cure 5 Minute Epoxy

    $9.99$14.99
    Bob Smith's Quik-Cure 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quick-Cure shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure is Bob Smith Industries only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure can be handled after 15 minutes. Full strength is reached in about 1 hour. Bob Smith's Quik-Cure 5 Minute Epoxy is known to discolor and turn yellow as it ages. Keep this in mind when using it for certain applications. This product is formerly known as Bob Smith's Quick-Cure 5 Minute Epoxy.
    Select options
    Compare
  • Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super GlueQuick view

    Bob Smith Royal-Onyx Instant Shaft Adhesive CA Super Glue

    $6.95
    Bob Smith's ROYAL-ONYX is a revolutionary new adhesive designed for the golf industry. This one-part cyanoacrylate is the strongest and most impact resistant adhesive available for bonding club heads. Clubs are typically playable within 45 minutes after application and it's the fastest and most durable way to get your clubs on the course. One 1.5 oz bottle assembles between 50 to 75 club heads. Shake well before use.
    Select options
    Compare
  • Slow Cure Bob Smith IndustriesQuick view

    Bob Smith Slow-Cure 30 Minute Epoxy

    $9.99$14.99
    Bob Smith's Slow-Cure 30 Minute epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. Slow-Cure can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with Slow-Cure and Finish-Cure to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours. Bob Smith's Slow-Cure 30 Minute Epoxy is the least type of epoxy to discolor over time with the exception of Finish Cure, along with forming bubbles in the resin as it dries.
    Select options
    Compare
  • Bob Smith Super Gold Super Thin Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold Super Thin Odorless Foam Safe CA Glue

    $7.99$19.99
    Bob Smith Industries' Super-Gold is an odorless low viscosity CA just like Insta-Cure. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, it will not Super Gold cyanoacrylate will not fog clear plastic. If you're looking for something with a higher viscosity and not water thin, check out the Super Gold+ which has a similar viscosity to Insta-Cure+. Super-Gold’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Super Gold+ Medium Thick Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold+ Medium Thick Odorless Gap Filling Foam Safe CA Glue

    $7.99$19.99
    Bob Smith Industries' Super-Gold+ is an odorless Insta-Cure CAs. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, Super Gold+ cyanoacrylate will not fog clear plastic and is great for attaching clear plastic canopies. Super-Gold+’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold+ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. If you're looking for a foam safe and odorless CA glue that's a bit thinner, check out Bob Smith's Super Gold CA Glue. It features a thin viscosity and great for filling tight gaps, just like Insta-Cure Super Thin. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Select options
    Compare
  • Bob Smith Super Gold Pocket CA Super Thin Gap Filling Foam Safe CA GlueQuick view

    Bob Smith Super Gold+ Pocket CA Gap Filling Odorless Foam Safe CA Glue

    $12.49
    Bob Smith Industries' Super-Gold+ Pocket CA is an odorless low viscosity CA just like Insta-Cure+. It's non-frosting and takes only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes and it's also foam safe on white foam. In addition, it will not fog clear plastic. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Ultra-Cure Tire Glue CA Super GlueQuick view

    Bob Smith Ultra-Cure Tire Glue CA Super Glue 130

    $7.49
    Ultra-Cure Tire Glue is a very high performance clear cyanoacrylate that has a medium viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto remote control R/C car wheels. It is available in our 3/4 oz Pocket CA bottle and comes with one of our new #304 Extender Tip for the Pocket CA pin-in-cap top. ULTRA-CURE can be used in many other applications that require a slightly thicker thin CA and will bond virtually everything. When using Bob Smith Industries Ultra-Cure Tire Glue, it's important to note that this cyanoacrylate glue gives of a vapor that may irritate the eyes and nose. Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest cyanoacrylate possible!
    Add to cart
    Compare
  • Bob Smith Un-Cure CA DebonderQuick view

    Bob Smith Un-Cure CA Debonder

    $5.95$17.99
    Bob Smith's UN-CURE debonder will soften cured Cyanoacrylate glue that has been applied fairly recently. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Bob Smith's UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Since cured Cyanoacrylate is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using UN-CURE on plastics. Separating plastics parts with a razor saw is usually the best option. Please Note: The 8 oz. bottles must be shipped ground and therefore can take longer than normal to receive.  Guaranteed Fresh! Our products don't sit in a warehouse for months, but rather days. We order on a bi-weekly basis from Bob Smith Industries so you are getting some of the freshest product possible!
    Select options
    Compare
  • Humbrol ClearFix 28Ml / .94 oz AC5708Quick view

    Humbrol ClearFix 28Ml / .94 oz AC5708

    $4.29
    ClearFix 28Ml by Humbrol Product Item #: AC5708
    Add to cart
    Compare
  • Humbrol DecalFix 125Ml / 4.22 oz AC7432Quick view

    Humbrol DecalFix 125Ml / 4.22 oz AC7432

    $9.95
    DecalFix 125Ml by Humbrol Product Item #: AC7432
    Add to cart
    Compare
  • Humbrol DecalFix 28Ml / .94 oz AC6134Quick view

    Humbrol DecalFix 28Ml / .94 oz AC6134

    $4.29
    DecalFix 28Ml by Humbrol Product Item #: AC6134
    Add to cart
    Compare
  • Humbrol Enamel Thinner 125Ml / 4.2 oz AC7430Quick view

    Humbrol Enamel Thinner 125Ml / 4.2 oz AC7430

    $6.99
    Enamel Thinner 125ml / 4.2 oz AC7430
    Add to cart
    Compare